| Fast Tracks http://www.fast-tracks.net/forums/ |
|
| Twist-Ties with PC & Wood Ties http://www.fast-tracks.net/forums/viewtopic.php?f=4&t=1191 |
Page 1 of 1 |
| Author: | irish_rogue [ Thu Nov 17, 2011 2:41 pm ] |
| Post subject: | Twist-Ties with PC & Wood Ties |
Hi All. Tried to make a post this morning but for some reason it disappeared, never made it to the board. Hopefully, I've posted this to the right forum, if not, please accept my apologies. I'll be using twist ties for most if not all of my railway and I need to know about compatibility between twist ties, pc ties and wood ties that Fast Tracks markets. Critically, profile dimensions of all three. I presume profiles are the same for these? The information is probably posted on the Fast Tracks website somewhere but I've missed it. Any direction on this would be greatly appreciated. Cheers! |
|
| Author: | jdm_com_au [ Fri Nov 18, 2011 12:46 am ] |
| Post subject: | Re: Twist-Ties with PC & Wood Ties |
The only dimensional difference is the thickness. The PCB ties are thinner than the other two. |
|
| Author: | irish_rogue [ Fri Nov 18, 2011 7:43 am ] |
| Post subject: | Re: Twist-Ties with PC & Wood Ties |
Thanks for that. I can certainly live with that. I'll need to put in a couple of slip switches when the time comes and discovered last night while cruising the website that I'll need to be using the Quick-Sticks for these.......it all became crystal clear while I looked things over.....the pc ties MUST be thinner in order to work. Great stuff! Thanks again. Cheers! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|