question about the "hex and single juicer?"

Chesticus · **Joined:** Fri Nov 20, 2009 3:54 pm **Posts:** 7

Sorry if this has been posted before.

1)Can the hex frog juicer and the mono frog juicer be used as an auto reverser for a return loop as well.

2) could several (4) be hooked up to a double cross over to ease or solve the wiring problems. I have seen some of the wiring solutions that call for an auto reverser. Could the "juicer " be used in this regard?

Again sorry if this has already been covered.

Jim Lowery

Chesticus · **Joined:** Fri Nov 20, 2009 3:54 pm **Posts:** 7

OK I read on the web site that it IS capable of dealing with the complications associated with a "double crossover." I think this will make my #8 double crossover wiring much easier.

Chesticus · **Joined:** Fri Nov 20, 2009 3:54 pm **Posts:** 7

OK last question on this matter.

If my calculations are correct I can use the hex frog juicer to control the 4 isolated sections of a double crossover AND the last 2 wires to control the reversing loop on my lower staging.

Does it matter how long the wires are?

Jim Lowery

Fast Tracks

question about the "hex and single juicer?"

Who is online